• 2 psi on a kegerator?

Kegerator Forum: 2 psi on a kegerator?

Need Kegerator Help?
Have an account?
Username

Password


  Remember me
Kegerator Community Home  »  Draft Beer Dispensing at Home » Kegerator Problems & Troubleshooting » 2 psi on a kegerator?
Posted:  29 Dec 2018 23:48

Registered User 		Posts:  
Join Date: Jan 1970
Currently I have a keg of bud light in my kegerator, temp of the beer is about 39 degrees, I have to keep the system at about 2psi otherwise it fill the glass to quickly and it’s all foam. Beer line is about 5 ft no longer. Maybe the kegerator which I got from my father in law is using a wider diameter tubing, I haven’t gotten a chance to check it yet. I know that tube length and diameter add resistance to the beer and can change the pressure at the tap so you can keep the psi into the keg around 10psi.. if i do have a wider tube would the 2psi turn my beer flat? I plan on getting new tubing after the keg is finished, just worried if this problem will continue. My wife’s uncle has a kegerator and he keeps his psi at about 2 as wel