• True Commercial Fridge to a Kegerator?

Kegerator Forum: True Commercial Fridge to a Kegerator?

Need Kegerator Help?
Have an account?
Username

Password


  Remember me
Kegerator Community Home  »  Draft Beer Dispensing at Home » Kegerators & Kegerator Kits » True Commercial Fridge to a Kegerator?
Posted:  24 Sep 2007 00:32

Registered User
Currently Offline 		Posts:  1
Join Date: Sep 2007
I have a True t-72 3 door commercial fridge that I want to put  keg in.  It sits behind my new bar and so all I need to do is to run a beer line out of the fridge into a tap on the bar.  Where do I run the line out of.  Do I need to cut a hole?  Can I cut a hole in the side?  How do I seal the hole back up?

http://i27.photobucket.com/albums/c158/rsnbledoubt/T-72.jpg
Posted:  27 Nov 2007 14:40

Registered User
Currently Offline 		Posts:  25
Join Date: Sep 2007
You can cut a hole in the side if there are no cooling lines. I would just drill a small diameter hole through the first inside layer to check for any obstructions.
A beer coupler is whats needed to seal the hole. Be sure when first drilling to go smaller in diameter than the coupler. If all is good, enlarge the hole to install the coupler.
Posted:  27 Nov 2007 15:33

Registered User
Currently Offline 		Posts:  25
Join Date: Sep 2007
Correction...use a shank instead of a coupler to seal the hole. I got coupleritis of the brain today.