|
|
Posted: 19 Dec 2015 20:44 | |
Registered User |
Posts: Join Date: Jan 1970 |
Hi All,
I have a fairly new kegerator (6 or so months old) that I've had no issues with. Recently I bought a new keg (Revolution Fistmas Ale) and refilled my c02 tank. After I replaced the co2 the faucet now "burps" every time I pour a beer and then exclusively dispenses foam. I attempted to clean the lines today with a gravity cleaning kit I've used before. This time it was extremely difficult as the solution would not flow unless I aggressively squeezed the bottle and even then there was a very slow flow. I've had plenty of kegs and this is the first time anything like this has happened and now the keg is useless. Is it possible the faucet is clogged? Please let me know if I can answer any additional questions! Thank you for all your help! Adam |
Posted: 21 Dec 2015 17:31 Last Edited By: CKO | |
Administrator |
Posts: 99 Join Date: Mar 2006 |
You need to take the faucet and keg coupler apart and soak them in cleaning solution like PBW or beer line cleaner. Sounds like you have not ever done this. I suspect you have build up in your coupler that is causing the check ball to not move like it should.
See this cleaning article... https://www.kegerators.com/articles/cleaning- ... |