• Kegerator KRS2000 coupler leaking when tapping

Kegerator Forum: Kegerator KRS2000 coupler leaking when tapping

Need Kegerator Help?
Have an account?
Username

Password


  Remember me
Kegerator Community Home  »  Draft Beer Dispensing at Home » Kegerator Problems & Troubleshooting » Kegerator KRS2000 coupler leaking when tapping
Posted:  20 Sep 2014 04:35   Last Edited By: dobu102

Registered User 		Posts:  
Join Date: Jan 1970
I have had a Kegerator KRS2000 for about 2 months now.  Was in process of installing my 3rd 1/4 keg.   When I tapped the keg, I noticed foaming beer coming out the top of the coupler and leaking all over the top of the keg.   I have not had this problem before and all my washers and backflow stopper seem to be fine....no cracks or issues.

What would cause all this foam to leak out the top when tapping.  I have to drive about 20 miles to bring home keg.  Could transporting cause this issue to happen?  I have seen where I should wait a couple hours to tap it after bringing home but I have not done this with the other 2 kegs.   Puzzled.   Please advise and thanks for the help.