• Home bar using kegerator

Kegerator Forum: Home bar using kegerator

Need Kegerator Help?
Have an account?
Username

Password


  Remember me
Kegerator Community Home  »  Draft Beer Dispensing at Home » Kegerators & Kegerator Kits » Home bar using kegerator
Posted:  09 Jun 2014 03:52   Last Edited By: Gixxerjoe

Registered User 		Posts:  
Join Date: Jan 1970
Hey everyone my name is joe. Here is what I have and what I am looking to get help on.

I have a custom 8' bar in the basement of my lake house with full cabinets underneath and a small sink.

I am looking to have a beer tap on the end of my 8' bar.

Ok so, I have a single tap kegerator, but my main concern is to move the tap from the top of the keg to the wall. Can anyone who knows this stuff give me links to any and all parts neccessary to convert my kegerator tap from the top of it, to the wall.

Any information will be greatly appreciated.
Thanks
Posted:  10 Jun 2014 18:54   Last Edited By: CKO

Administrator 		Posts:  99
Join Date: Mar 2006
Sounds like you need to mount a tap though the side wall at the end of your bar... A wall shank like this https://www.kegerators.com/equipment/nipple-s ... would let you mount a faucet on the wall.

I would take the tower off the kegerator and cap the top hole (plastic cap usually comes with a kegerator), then mount another shank on the side of the kegerator. Run beer line from the kegerator shank to the wall shank and insulate with foam tube found at any hardware store. So many ways to do what want to do, so this is just one suggestion.