|
|
Posted: 14 Mar 2013 02:19 | |
Registered User Currently Offline |
Posts: 2 Join Date: Mar 2013 |
First time post, fairly new kegerator owner... in need of a little help!
I got a keg of Guinness in for St. Pat's. I got it all hooked up and noticed I had a leak on the air side. I found the leak at the connection of the air line to the coupler. I tightened the nut and it didn't help. The U coupler has a weird check valve with metal insert. I have this coupler... http://www.micromatic.com/draft-keg-beer/taps ... ...and I set it up according to the chart under "replacement parts". I used the check valve, the metal insert, and the standard coupling washer. After finding the leak, I turned off my nitro and untapped. After disconnecting the air line, I took the metal insert out and re-tapped - no leak! Do I need this metal insert? If so, what am I doing wrong? |
Posted: 15 Mar 2013 04:51 | |
Registered User Currently Offline |
Posts: 2 Join Date: Mar 2013 |
Resolved... |
Posted: 20 Mar 2013 22:38 | |
Administrator |
Posts: 99 Join Date: Mar 2006 |
What was the issue? |