• Nothing but kegerator foam... Help??

Kegerator Forum: Nothing but kegerator foam... Help??

Need Kegerator Help?
Have an account?
Username

Password


  Remember me
Kegerator Community Home  »  Draft Beer Dispensing at Home » Kegerator Problems & Troubleshooting » Nothing but kegerator foam... Help??
Posted:  03 May 2012 20:33

Registered User
Currently Offline 		Posts:  1
Join Date: May 2012
I've put my keg & lines back together after cleaning, hooked up a new keg of beer, and it is not dispensing anything but chunks of foam. Keg has settled for two days now. I did find a small rubber "cone shaped" devise, that I cannot remember where it goes. Also noticed a little beer in my Co2 line. What do I need to do to fix this problem? Thanks, Joe
Posted:  04 Jun 2012 04:56

Registered User
Currently Offline 		Posts:  3
Join Date: Jun 2012
I'm no expert (even after owning one for 18 years), but you might recheck your lines. Did you reverse them where they connect to the coupler that locks onto the keg? Also check your pressure. It should be around 12 psi. It's also possible that your pressure gauge is giving a false reading. If so, you can buy a rebulding kit instead of buying a whole new gauge. Don't know of any cone-shaped device in my system.