• No flow!

Kegerator Forum: No flow!

Need Kegerator Help?
Have an account?
Username

Password


  Remember me
Kegerator Community Home  »  Draft Beer Dispensing at Home » Kegerator Problems & Troubleshooting » No flow!
Posted:  06 Feb 2011 01:09

Registered User
Currently Offline 		Posts:  1
Join Date: Feb 2011
I have a Summit Kegerator.  I believe it is hooked up properly.  Temp is mid 30's.  I purchased first 1/4 keg.  Let it sit overnight.  Have PSI at 10-12 and when I tapped with standard sandkey I get a puff of air and little bits of foam intermittently.  I have adjusted the pressure up and down.  If I put it up to 20 the air and foam bits come faster but no beer.  I tried the euro sandkey and get heavy flow of tight foam that eventually settles into beer.  It appears that the CO2 is getting in and coming out but the beer isn't.  Any ideas?
Posted:  14 Feb 2011 08:03

Registered User
Currently Offline 		Posts:  34
Join Date: Oct 2010
First off make sure you are using the right coupler for the keg. A, D, S, etc...

After that it's more of a matter of did you hook all the items up right. Give me some more information about what beer you're running and what parts you have.

Also how long is your line. I'll get back as soon as I can.