• EDGESTAR KEGERATOR

Kegerator Forum: EDGESTAR KEGERATOR

Need Kegerator Help?
Have an account?
Username

Password


  Remember me
Kegerator Community Home  »  Draft Beer Dispensing at Home » Kegerator Problems & Troubleshooting » EDGESTAR KEGERATOR
Posted:  01 Jan 2009 17:29   Last Edited By: stelctn

Registered User
Currently Offline 		Posts:  1
Join Date: Jan 2009
BRAND NEW EDGESTAR  I CANT GET THE BEER BELOW 47 DEGREES
Posted:  02 Jan 2009 19:42

Administrator 		Posts:  99
Join Date: Mar 2006
How are you taking the temperature reading? I place a glass of water with a thermometer in the water. This will give you the exact temperature reading of the liquid inside the kegerator.

Sometimes the temperatures of the chamber are not as cold as the liquid. Just a thought.

If that temperature is not getting down into the high 30s then you should contact EdgeStar and see about getting service or a replacement. http://www.edgestar.com/contact.asp

I have personally tested this unit and have been successful getting 38 degrees to hold.
Posted:  13 Sep 2012 02:57

Registered User
Currently Offline 		Posts:  2
Join Date: Jul 2012
My Edgestar kegarator was about 39 degrees last date and now about 41 to 42.  The door was not opened for 12 hours today while i was out and was still at about 42 this evenening
Posted:  22 Aug 2013 20:07

Registered User 		Posts:  
Join Date: Jan 1970
So my Edgestar KC2000 works great but was disappointed to find out that supposedly niether Miller nor Coors kegs fit inside. I plan to get the coupler I need for imported beer but can anyone recommend domestic beer brands other than Anheuser Busch or micro brews that would work with this kegerator? Thanks