• Flow Issues....

Kegerator Forum: Flow Issues....

Need Kegerator Help?
Have an account?
Username

Password


  Remember me
Kegerator Community Home  »  Draft Beer Dispensing at Home » Kegerator Problems & Troubleshooting » Flow Issues....
Posted:  27 Dec 2008 02:42

Registered User
Currently Offline 		Posts:  1
Join Date: Dec 2008
I am a newbie like others on here...I bought a "Magic Chef" kegarator from Home Depot...

I had to replace the regulator almost immediately, but when I got the new one and hooked it up with a Miller Lite keg, and I experienced the following...

Flows good for about 10 seconds, with a lot of foam...then it trickles down to nothing quickly.  If I wait about 10 minutes, I get a small decent pour (half a glass) and then nothing again.  There is still a lot of head and the beer is OK taste wise (a bit flatter than I would like)

I have checked the ball inside the coupler, re-attached all lines, and made sure that my psi was at 10-12. There seems to be a lot of bubbles in the beer line but is certainly not dried out.

Anyone got any ideas...