Kegerator Forum

Posted:  20 Aug 2017 23:45
So I got a keg of PBR. Was pouring perfectly fine for two-three days. Then the line froze and it just turned to foam. Been a week since and it's still just all foam. I turned the temp up a bit to keep the line from freezing. Psi is @14. Once the beer settles it's super flat. It's a very old Rapids kegerator. Don't even think they make them anymore. Any ideas of what I can do to salvage the rest of the keg?
Posted:  20 Dec 2017 03:23
psi is too high, I like to keep mine at around 7-8 psi! Watch your temperature, usually 39-42 degrees!