Kegerator Community & Forum

New to Kegerators?

Our kegerator community is a rich source of instant information. Stay updated. Keep others updated. It's a beer thing. Talk amongst yourselves and share the wealth of knowledge that only you hold in our kegerator forum.

Have an account?

Pages: 1

Posted: 21 Jan 2007 08:15

Registered User
Currently Offline

Posts: 1
Join Date: Jan 2007

i recently won a marvel kegerator. i had to buy a keg of course, but am having trouble getting the beer flowing right. i have adjusted the CO2 pressure to 12PSI and no hoses are kinked. every time i try to fill a glass up, i get atleast half the glass full of foam. i don't know what i'm doing wrong and need some advice on how to fix this problem. if anyone has any suggestions i would greatly appreciate them. thanks, matt

Posted: 06 Sep 2007 21:37

Registered User
Currently Offline

Posts: 25
Join Date: Sep 2007

Mine has always done that since day one. I always set the first glass aside and pour a new one. As the first glass of foam settles I use it to replenish.

Posted: 10 Dec 2007 20:51

Registered User
Currently Offline

Posts: 2
Join Date: Dec 2007

I set my CO2 at 7 PSI, works great.

Posted: 16 Dec 2007 10:07 Last Edited By: mykegeratorissick

Registered User
Currently Offline

Posts: 7
Join Date: Nov 2007

I had the same problem. If I were yous, I would turn off you CO2, release all the pressure from the keg using the pin valve on the coupler, and drop the CO2 regulator down to zero. After that, turn your CO2 tank back on and increase the PSI a LITTLE AT A TIME until you get the right flow. Good Luck.

Pages: 1

| | | | |