| Posted: 24 Feb 2010 03:09 Last Edited By: gregjamesbeer | |
Registered User
Currently Offline
|
Posts: 1
Join Date: Feb 2010
|
|
Alright so my friend and i got a danby kegerator from his father because it had a faucet leak and he didnt want to fix it. We replaced the gasket in the faucet and thought we were golden. Until we pulled the tap. Its spitting out foam and air and no beer at all. The temperature is right on and the psi is at 10. We tore it back apart and clean the lines, faucet, and tap itself. That did absolutely nothing and we are lost with what steps we should take. We are now thinking maybe its the regulator? The lines arent getting a constant flow of beer in the least bit. Does ANYBODY have any advice?
|
